Clamping Push And Pull Force Meter Rs232 Nine-Hole Socket Data
Interface
Push and pull force meter,digital force meter,clamping force
meter,portable force meter
Product description of Push And Pull Force Meter
HF series of digital push-pull force meter is a small, simple and
versatile high-precision thrust, tensile testing equipment, widely
used in electronic appliances, construction hardware, light
industry and textile, auto parts, lighters and other ignition
devices, fire equipment, , Lock, fishing gear, chemical, power
machinery, scientific research institutions and other industries
push and pull load, plug force test, destructive test. Digital
display resolution is high, the sampling speed is easy to use, for
a new generation of high-precision high-precision push-pull test
equipment.
Features of Push And Pull Force Meter
1. High-precision high-resolution: precision 0.5, the minimum
reading of 0.001N;
2. 6 kinds of measurement modes: standard test mode, push and pull
peak mode, thrust peak mode, pull peak mode, external node off pass
horizontal, external power saving mode, the maximum increase in
test efficiency;
3. Three kinds of display options: real-time, peak, automatic peak;
4. Three units of conversion: N, kg, lb;
5. Peak hold function: can capture the peak of the test process;
6. Comparison function: the upper and lower limits of free
deviation. LCD display were "MAX" "MIN" display and buzzer
automatically reported;
7. Signal output function: You can set the comparison value, when
the measured force value is greater than the comparison value, the
output signal;
8. Automatic peak function: to maintain the display peak 2 seconds
after the automatic release;
9. Automatic shutdown function: 10 minutes without operation
automatically shut down;
10. Calculation function: connected to the computer, you can
automatically calculate the maximum value of each test, the minimum
value;
11. LCD screen can be reversed display: press the "print" button to
flip the display 180 degrees;
12. Real-time analysis function: can be connected to the computer,
the test on the computer synchronization display test curve to do
all kinds of analysis.
Model specification | HF-2 | HF-5 | HF-10 | HF-20 | HF-50 | HF-100 | HF-200 | HF-500 | HF-1000 |
Peak load value | N | 2 | 5 | 10 | 20 | 50 | 100 | 200 | 500 | 1000 |
| kg | 2 | 0.5 | 1 | 2 | 5 | 10 | 20 | 50 | 100 |
| lbs | 0.44 | 1.1 | 2.2 | 4.4 | 11 | 22 | 44 | 110 | 220 |
load division value | N | 0.001 | 0.001 | 0.01 | 0.01 | 0.01 | 0.1 | 0.1 | 0.1 | 1 |
| kg | 0.0001 | 0.0001 | 0.001 | 0.001 | 0.001 | 0.01 | 0.01 | 0.01 | 0.1 |
| lbs | 0.0001 | 0.0001 | 0.001 | 0.001 | 0.001 | 0.01 | 0.01 | 0.01 | 0.1 |
Indication error | 0.50% |
| Unit | N / kg / lb |
Data interface | Rs232 nine-hole socket |
| Power | rechargeable batteries, charger(charging voltage 100V-240V) |
Sensor structure | S-tye sensor with high precision (inner sensor) |
Ambient temp. | 5° C~35° C |
Transport temp. | -10 C~60° C |
| Relative humidity | 15%~80%RH |
| Working conditions | No hypocenter and corrosive medium |
| Gross weight | ~2000g |
| Size | 273 x 182 x70 mm |
Packing and Shipping
Company Introduction
Factory Show
Certificate
Our Services
